Translate: Chinese | Dutch | French | German | Italian | Japanese | Latin American Spanish

How to Use Your CGI -BIN

Try our Auto-Responder Demo now

  Best Work-At-Home Solution

Site Build It! 

 

 

 

This page will take a minute to fully load as there are a number of "screen-shots" and diagrams.



Getting Started

A lot of people have Web pages but most feel that CGI scripts are "over their head". Nonsense! If you know basic HTML and know how to use an FTP program like WS_FTP to transfer files, chances are you can be using a CGI script on your Web pages in about 15 minutes. With so many free CGI scripts available you are really short-changing yourself if you are not using the CGI capabilities offered by your ISP or host provider to use CGI scripts.

While there are a lot of "CGI Tutorial" pages out there, most deal with how to write CGI scripts. For those who just want to know how to use CGI scripts, information is pretty scarce. That's why this page was created.

What Is CGI ?

You've undoubtedly visited Web pages and seen "cgi-bin" appear in the location line of your browser. CGI stands for "Common Gateway Interface". It is a server-based service which provides a means of adding expanded functionality to Web pages over and above what HTML provides. This expanded functionality is provided by using small programs, or "scripts", that are executed on the server the Web page files reside on. When you see that "cgi-bin" appear on the location line, you probably executed a CGI script on the server when you initially loaded the page, or will in the course of using the page.

CGI is utilized by placing an appropriate HTML tag in your HTML document ("Web page"). The author of the script you wish to use should provide you with the appropriate HTML tag needed to run that script. When the page is loaded by a browser, i.e. viewed by a site visitor, the tag "calls" the script and it is executed by the server. Note that this is different from Java applets or JavaScript, which are executed on the client (visitor's) system via their browser.


CGI and Perl

You will often see the term "Perl" used with the term "CGI". The two are NOT the same. CGI programs, or scripts, can be written in a variety of computer languages, including C. CGI is the process by which scripts are run. Perl is the most common language used for writing CGI scripts, and for very good reason. 

Because Perl has its' roots in Unix, many people think that Perl CGI scripts cannot be used on Windows NT Web servers. Not true! Perl CGI scripts can not only run on Unix and NT servers, but with a little tweaking for "AppleScript", many can run on Macintosh servers as well.


Your CGI

Most ISPs that offer Web space and Website "hosting" companies support the use of CGI scripts. It is so common in fact, that if your ISP or host provider doesn't offer it, you should consider taking your business elsewhere. The two questions that need to be answered are:

1. Can I run CGI scripts from my Web pages ?

2. Does my CGI script support include SSI (Server Side Includes) ?

    Note:  Don't confuse SSI with SSL (Secure Socket Layer), they're two entirely different things.


If the answer to both of these questions is "Yes", you're good to go. You can run most of the scripts available on the Web. There are some scripts that don't require SSI but a lot do so having SSI support will allow you to run more scripts. However, if you don't have it you can still run some scripts. The documentation (readme file) should come with the script and state whether it requires SSI support or not.

"Server-Side Includes" are just that, commands (aka "directives") to the Web server to include some information the server has in the displayed Web page. A common use of SSI is to display the current date and time on a Web page. These commands are enclosed within HTML comment tags (<!--   -->) in a Web page so the browser ignores them. These comment tags with an enclosed server command are the "SSI directive tags" that are mentioned below. When these SSI directive tags are used with scripts, the "...information the server has..." is whatever output was generated by the execution of the script. The script will dictate whether this information is displayed on the Web page (as with a hit counter) or written to some file (as with a logger). As an example, here is the HTML (SSI directive) tag for Bestdam Logger:

<!-- #exec cgi="/cgi-bin/bdlogger/bdlogger.pl" -->

 

Back to your CGI situation. Most Web hosting services and ISP's have a Technical Support section on their Website that may also have a "FAQ" (Frequently Asked Questions) page. Snoop around their support pages and see if they if you can find anything related to CGI and SSI that may answer the above questions.

If all this talk of Perl, SSI, Linux, etc. has you a little confused, here's a diagram to show the inter-relationship of the various components of a typical Internet server. Note that "Apache" and "Sendmail" are like brand names. There are other Web-sever and e-mail-server software packages available.

Server Diagram


One way to tell if you have CGI capability is if you have a sub-directory (folder) in your root Web directory called cgi-bin. If you do, you very likely do have CGI capability. The only question then is, does your CGI capability include SSI support ? If you didn't find an answer to this on their Website, you will have to check with your host or ISP.

WS_ FTP PRO Screen Shot


If you don't have a cgi-bin sub-directory that doesn't necessarily mean you don't have CGI capability. It could mean it hasn't been set up.

Normally you cannot simply create the cgi-bin sub-directory yourself. It is a special sub-directory that must be set up by a system administrator. However, I have seen hosts that allow you to create the sub-directory using an FTP program and use their Website "admin" function to enable it. If you are able to create it, how to CHMOD this sub-directory is given at the end of the next section.

Note that your host provider or ISP may set up a sub-directory called simply cgi rather than cgi-bin. This is the same thing and you would just need to make the necessary changes to any tags you add to your Web pages to run scripts.

In some cases, hosts or ISPs that do not offer CGI capability with their base package will offer it as an "add-on" or optional service for an additional fee.


Three Steps To Using a Script

Once you've established that you do have CGI and SSI capability, there are three basic steps you need to take in order to use a script on your Website:

  1. Set any options that the script may need
  2. Transfer the script's files (the script file itself and any necessary data files) to the server
  3. Add the script's HTML tag to the page(s) you want to use the script
Perl scripts typically have a .PL extension, but they may also have a .CGI extension. (Files with other extensions, or no extensions, will likely be data files used by the script.) "Setting options" in scripts is typically just a matter of opening the .PL (or .CGI) file in a text editor and entering values for some of the scripts variables. For example, you may need to enter your e-mail address if the script sends e-mail notifications of some event. Details on setting script options for
Follow Up Autoresponder  are in the readme.txt file. However, the top of the config.cgi file is heavily commented with instructions for setting the options so you may be able to set them just by opening the file in a text editor and reading the comments.

Note:  Some hosts or ISPs may require that scripts have a .cgi extension. It is normally not a problem to just rename the file to comply.

With the script all set up and ready to go, the next step is to transfer the script files to your Web server and set the proper "permissions" to the files. These permissions are necessary so your Website visitors can access them properly (covered in detail in the next section).

That takes care of the script side of things. The final step is to add the appropriate HTML tag to your Web page (HTML file) to call the script and then transferring that updated page to the server. The documentation that came with the script, or the comments in the script file itself, should include the appropriate tag to use.

But remember that you may have to modify this tag. Most tags assume your CGI sub-directory is called cgi-bin. If it's called simply cgi, or something else, make the necessary change in the tag.

Taking the above Internet server diagram and adding another box and a few more lines, you can see how your HTML file completes the process.

Server Process





Transferring Files

Transferring script files to your Web server is not much different than transferring your Web page files there. The main differences are that you'll be putting them in their own sub-directories and, if your server is running a Unix or Linux operating system, setting the permissions to the files.

The screen-shots in the steps below are using the WS_FTP program but other ftp programs should have similar functions.
  1. Go into the cgi-bin sub-directory (i.e. open the cgi-bin folder by double-clicking on it)
  2. Example:
Make a new sub-directory (folder) under cgi-bin with the name of
TMAR (traffic-magic auto responder) by clicking on the MkDir button.

 

WS_FTP PRO Screenshot 1



Technically, you could just transfer the files into the cgi-bin sub-directory but, because you may want to use additional scripts in the future, it is best to put each script in its' own sub-directory.


  1. Double-click on the new autoresponder folder to open it and   USE ASCII MODE !!!   to transfer all 5 of the following files into the new autoresponder sub-directory (the readme.txt file that comes with Follow Up Autoresponder does not have to be transferred):
     

    Ws_FTP Pro Screenshot 2



    NOTE:   If you are using any version of Windows, the file names may have been changed so that the first letter of the file names is upper-case. Make sure the file names are all lower-case letters once they are on the server. If they are not, use the "Rename" button of your FTP program to change the file names to all lower-case letters on the server.

    Ws_FTP PRO Screenshot 3



    Setting File Permissions

    Web servers will generally be based on one of two operating systems. Either some "flavor" of Unix or Linux, or Windows NT.  Step 4 is necessary only if your pages are hosted on a Unix/Linux server.  Most are.  Check with your ISP if you're not sure of your server's OS.

  2. Once the files have been transferred you have to set file "permissions" so people can access them. The Unix term for setting file permissions is CHMOD. You must CHMOD the Follow Up Autoresponder files as follows.
    activate.cgi - 755
    config.cgi   - 755
    swars.cgi    - 755
    Lite.pm      - 644

    The above numbers are based on the "binary" number system used in computers. If you don't know what that means don't worry. You can CHMOD files using WS_FTP as follows:


    click once on the activate.cgi file name to highlight it

 

WS_FTP Screenshot 4

 

 

File Permissions Screenshot

File Permissions Screeshot 2


 

WS_FTP Screenshot 5



  1. Now that you've got the script files ready to go, it's time to take care of the script's HTML tag. This tag may be an "SSI directive". Which pages need the tag depends on the script. Typically, most scripts only require the tag to be placed on one page.

    Important Note: Be careful about putting the script's tag on multiple pages. A script will usually only have a single data file for a given function. For example, if you install a very simple hit counter script and you put the tag on multiple pages, the "hit count" displayed could be the cumulative hits of all the pages having the HTML tag. You have to look at the documentation that came with the script. Some hit counters do have "multi-page support" for simultaneously tracking hit counts of multiple pages in one data file.

    Open your Web pages in your HTML editor and add the script's tag keeping the following in mind:

    • Make sure you put it before the closing "body" tag (</body>).

    • If the script is a hit counter or something else that displays something on your page, the placement of the tag in your HTML document will determine the placement of whatever's being displayed (hit count, etc.) on your Web page.

    • Unfortunately, given the large number of possible server configurations, your host or ISP may have the following requirements. Check with them if you run into problems trying to run the script.

      • If you're using a script that requires SSI, the Web page with the SSI directive tag must have an .shtml or .shtm extension. Check with them regarding any such requirement. (This could present a problem if your page is already indexed or referenced on a lot of search engines or directories with a different extension.)

      • You may need to use a relative path in your tag. For example,

        instead of
        <!-- #exec cgi="/cgi-bin/autoresponder/swars.cgi" -->
        use
        <!-- #exec cgi="cgi-bin/autoresponder/swars.cgi" -->


    Once the tag is added to the appropriate page(s) and the changes have been saved, transfer them to your server as you normally would. i.e. Do not transfer them into the cgi-bin sub-directory or any sub-directory under it.


If You Plan To Use Graphics Counter Digits 
 

 

Double-click on the new digits folder to open it and   USE BINARY MODE !!!   to transfer the digit graphics files of your choice into your new digits sub-directory



 

 


IMPORTANT NOTES:

The graphics files must have the single character name for the number they represent. For example, if they are .gif files, they must be named:

1.gif 2.gif 3.gif etc. Use the "Rename" function of your FTP program to rename them if necessary.

Do NOT create the digits sub-directory under the cgi-bin sub-directory or people may not be able to access the digit files.

Here is an example of a count displayed when using digit graphics files:   Digit Graphic Counter



Try our Auto-Responder Demo now

Using Free Scripts

As mentioned previously, most CGI scripts are written using the Perl language. When a Perl programmer writes a script they may choose to make it freely available to everyone on the Web. However, you should use caution when selecting these free scripts. I have seen many instances where these free scripts do not adequately "lock" files (which is important in a Web environment where multiple people could be viewing the same Web page simultaneously). Some poorly written scripts could also actually pose a security risk by allowing unauthorized access to the server. Unfortunately, there is no easy way for the untrained eye to determine if adequate file locking is used or if the script represents a security hole. And most Websites that offer scripts from third parties for download do not perform any sort of quality control checks. When in doubt, ask your host or ISP to look over the script you want to use. Most would much rather take a couple minutes to evaluate a script than clean up the mess a poorly-written script could cause.

The Files

Perl scripts typically have a .PL extension, but I have also seen them with a .CGI extension. Files with other extensions, or no extensions, will likely be data files used by the script. Serious Perl script programmers will also include a readme file that contains information about the script and how to set it up. This readme file is intended for those who will be using the script and does not have to be transferred to the server with the script and data files.

More complex scripts may have more than one .PL file which may require different HTML tags for each one. (It's also possible that one script may "call" another script so that only one tag is needed.) Also, be on the lookout for additional .PL files with names like config.pl or cfg.pl. These are script files where all of the user-settable options are entered and stored. If a file like this is included in the download file, you typically don't have to open the main script file to set options. The main script will refer to this configuration script each time it is executed.

All of these files are typically combined into a single .ZIP file for you to download from a Website.

The Setup

Perl scripts are simply plain old run-of-the-mill ASCII text files. However, instead of containing sentences that make sense to humans, they mostly contain commands that make sense to servers. There is an advantage to this though. Because Perl scripts are ASCII text files, the Perl programmer can also put human-understandable instructions in the script, and many often do, locating this text right at the beginning (top) of the file. It is easy to spot the information that is meant for you to read because the line will start with # character.

The # character is the "comment" character in Perl. Any line that begins with a # does not get executed by the server. In addition, the programmer can also put a # character after a script statement to add comments. For example, you could see the following statement in a script which acts as a user-settable option:

$counthits = 1;           # 1 = Yes     0 = No

Once you have downloaded and un-Zipped a script that you would like to try, you should use a text editor like NOTEPAD to open the main, or if found the configuration, .PL file and check the top of the file for any information or setup instructions. If there is a readme file, open that in a text editor and look for setup instructions also.

One key piece of information you should find either in the comments in the script file, or in the readme file, is the HTML tag you need to add to your Web pages to execute the script. Using the file transfer example in the previous section, the tag for
autoresponder would be:

<!-- #exec cgi="/cgi-bin/autoresponder/swars.cgi" -->

If you don't find the HTML tag given anywhere you can substitute the sub-directory and script names in the tag above. Note that the provided HTML tag with some scripts may assume you are putting the script in the cgi-bin sub-directory, not a separate sub-directory under it. If this is the case, and you want to put the script in it's own sub-directory just modify the tag. For example, say you downloaded a script called "GigCount" and the tag specified in the script's comments or documentation was:

<!-- #exec cgi="/cgi-bin/gigcount.pl" -->

If you wanted to put the script in it's own sub-directory named "counter" you would simply modify the tag to

<!-- #exec cgi="/cgi-bin/counter/gigcount.pl" -->

CGI scripts that do not require SSI might have a more common type of tag. For instance, a counter script may have the tag
<img src="/cgi-bin/counter/gigcount.cgi">

I would also like to reiterate several points about possible host/ISP requirements mentioned in the previous section.



In addition to a tag, the information near the top of the script file or readme file should also contain instructions for you on what values to use to CHMOD the files, as well as setting any user-settable options the script may offer.

The very first line of any Perl script is a user-settable option and is always going to be the path to your host's Perl installation, preceded by the characters "#!". This line is commonly referred to as the "shebang". Typical shebangs can be:
Note that Perl 4 scripts will work with a path to a Perl 5 installation but the reverse may not be true. If you're having problems getting a script to work with the first one, try the second. Note also that this first line may not be necessary with Windows NT servers.
If you haven't yet done so, now would be a good time to snoop around your host's or ISP's Website Technical Support pages and FAQs looking for anything related to "CGI". There you may find not only the path to their Perl installation (and possibly the version of Perl they have installed), but to their e-mail programs and other paths as well. If you can't verify this information, just leave it at the default value, but verify it with your host or ISP if you run into problems trying to use the script.

If you know how to use the telnet program to access the shell of your Unix/Linux server, you can use the   whereis   command to find out the paths to your Perl and sendmail installations. At the shell prompt, simply type in
whereis perl
and
whereis sendmail
and the paths will be displayed. Note that you will often get multiple paths displayed, some ending with things like   /perl5.003   and   /sendmail.cf   but you are only interested in the paths that end with   /perl   and   /sendmail   - i.e. with no extensions. There may even been multiple path listings to these, but that just means there are different versions installed.

You may also be able to find the system path (see the paragraph below) to your Web directory by using the   pwd   command (print working directory).
Setting options usually involves entering values for script variables. These values can be a '1', 'Y', 'y', 'YES', etc. to enable an option and a '0', 'N', 'n', 'NO', etc. to disable it, or certain user or system information may be needed. In some cases you may be asked to enter path information or an e-mail address. For example, near the top of the
config.cgi file you are asked for your e-mail address (so the site visitor data can be e-mailed to you) and the path to your server's e-mail program. The comments in the script or configuration file should clearly indicate what the option is and what the valid optional values are.

Some scripts will ask you to enter the system path. This is not the URL. The system path is the path from the root of the server which is hosting your site and will look something like this:

/usr/local/etc/usersites/(your website identifier)/

You'll have to ask your host or ISP if you don't know what your path is. The problem is that they may not be too quick to give this information up for security reasons. If that's the case, there's not much you can do. You can try asking them to take a look at the script you want to use so they can see how the path is used.

If some of what you read at the beginning of the .PL file doesn't make any sense to you, don't feel like you're doing something wrong. Many Perl programmers will write these comments for other Perl programmers, or worse, for others who are well-versed in Unix. If you find that the instructions are not clearly written for those without Perl programming or Unix experience, and there is no accompanying readme file with easy-to-understand instructions, you may want to forget about using that script and find something with clearly written, understandable instructions.

Detailed setup instructions for
Follow Up Autoresponder are given in the readme.txt file contained in the .ZIP download file 
With everything set up in the script file it's time to transfer the files and, with Unix/Linux servers, set the permissions (detailed in the previous section). The most common mistake people make when using ftp to transfer script files to the server is not using ASCII mode to transfer the files. Be sure to use ASCII mode when transferring the script files ! A script will not work if it is transferred in binary mode. 

Troubleshooting

The vast majority of script problems are due to configuration issues. When you consider that there are so many different flavors of Unix out there, multiplied by the number of possible configuration options, multiplied by the number of Web server software packages out there, multiplied by the configurations options they have, you can see why this is the case. That's not to say you should go running to your host or ISP if your script doesn't work right off. The truth is, trying to solve problems is one of the best learning experiences there is. There are a lot of things you can check, and if you do go to your host or ISP and say "I have checked....." they'll know you have some knowledge of what you're doing and take you seriously.

If you've set up and installed and script and you feel it may not be working, there are certain steps you can take using your browser to try and track down the problem.


You may also have another troubleshooting tool at your disposal. If your host or ISP generates an individual error log for your domain, it will likely contain error messages which will indicate what problems were encountered when the server tried to execute the script. The error logs are typically just ASCII text files so you can ftp them to your local hard-drive and open them using a text editor.

Visit the Traffic-Magic
Follow Up CGI/Perl Resources page for a list of sites with collections of free scripts you can download.





Messin' Around With Perl
If you've had even basic exposure to computer programming or Javascript you'll find that Perl is a very easy language to learn because of it's script nature. In addition, because Perl scripts are ASCII text files, you can look at the code of the scripts you use to see how things are done. This text-based script nature means that Perl is an "interpreted" language. i.e. compilation of a Perl script is done on the server every time the script is called. CGI scripts written in some other languages, such as C, have to be compiled manually (once) before they can be called. Even so, even large Perl scripts tend to compile/execute very quickly.

Don't let this ease-of-learning fool you. Perl is used for some very sophisticated applications. In addition, it can be used with the free MySQL engine for applications requiring the use of databases. While no one can predict the future, I would suspect that as Linux becomes more and more popular as an operating system for Internet servers, Perl will become more and more popular. As an indication of the potential growth of the Linux market, consider that Red Hat, a major distributor of Linux, had it's stock price rise over 600% on its' first day of trading and it continues to rise. If you invested the very short amount of time necessary to familiarize yourself with Perl, you could begin writing your own scripts (not to mention develop a highly marketable skill).

"Messin' Around With Perl" means just that. You don't have to start out writing your own scripts from scratch. Read the License Agreement or "conditions of use" that normally come with a script. Some script authors will say it is OK to modify their script. Because they're just text files you can take such a script, try using it for awhile so you know what it does, and customize it a little bit. Transfer your customized script to the server and see how your modifications affect the script's performance. (Keep a backup copy of the original script with your options set in case you hose things up. If you do hose it up, just upload this backup copy to your server to replace the hosed-up version). The more you learn about Perl the more customizing you can do. That will help prepare you for writing your own scripts from scratch.

Caution:  Make sure you have a copy of Perl-Win32 on your local system (see the "Good Books" section below) so you can test your modified scripts. You don't want to try executing a script on a commercial server without doing some preliminary testing first. A rouge script could crash a server and since most hosting companies host a lot of domains on one server, bringing it down could make you very unpopular with a lot of Webmasters.

Perl Basics

If you know just a few simple Perl things you'll be able to look at most Perl scripts and figure out what they do.


Check it out for yourself. Here is the Perl script for a hit counter. In viewing the hit counter script you may have noticed that the name of the data file is first assigned to the $countdata variable, and then that variable is used in the open statements. While that's a rather round-about way of doing things in a simple script like this I wanted you to see it as it's quite a common practice. File names are assigned to variables, typically near the start of the script, so that only one change is needed if you have to change the path or file name for some reason, rather than looking through the code for all of the open statements. In a simple script you could simplify things by just using the file name in the open statement like this:
open (COUNT, 'counter.dat');
One thing you probably didn't notice is that there was no file locking done in this script. Bad news. Any time a file is opened for a write operation it should be "locked" so someone else can't try to write to it at the same time. The script should have an additional lock statement after the open-for-write statement (one of the things you want to look for in free scripts):
open (COUNT, "> $countdata");
flock(COUNT, 2);
print COUNT "$hitcount";
Perl is very flexible and "programmer friendly". You don't have to declare variables or follow strict rules as to their "type". For instance, if a string variable contains a numeric digit you can mathematically add it to another string variable that also contains a numeric digit. Perl handles the type conversions automatically.

Real World Perl

Perl started out as a reporting language so it has many features for handling text and strings. That includes text and strings that are components of an HTML document. As a result, you can use Perl scripts to dynamically create Web pages on the fly. This can be more valuable than it first sounds. Consider this example:

People in your organization would like to view a report containing some real-time data. If this report is in, or you can get it to, a text file you could create a simple Perl script to write the appropriate HTML to a file. This file would be a Web-page version of the report that people could view from anywhere using their browser.

Any text placed between the <PRE></PRE> (pre-formatted) HTML tags retains their spacing so a lot of other HTML tags aren't necessary to replicate the report appearance. In between the <PRE></PRE> tags you use a different kind of SSI tag from the exec covered in the previous section. The include SSI tag will include the contents of a separate file in a Web page. If the file is named rt-data.txt the tag would be:

<!--#include file="rt-data.txt"-->

As a result, the main pieces of Perl code for this script, lets call it genrtr.pl, would be:


#!/usr/local/bin/perl
print "Content-type: text/html\n\n";
$reporthtml='rtreport.shtml';
.
.
open (WEBREPORT, ">$reporthtml") || die 'Couldn't open HTML file';
flock (WEBREPORT, 2) || die 'Couldn't lock HTML file';
.
.
print WEBREPORT '<PRE>';
print WEBREPORT q[<!--#include file="rt-data.txt">];
print WEBREPORT '</PRE>';
.
.
close WEBREPORT;



The    print "Content-type: text/html\n\n";    merely sets a Web page as the default output "device". In this case, the default Web page would be the standard server error Web page your host or ISP has which would also display the die error messages if your script runs into a problem accessing the data file. Since the Web page is the default for output, we have to specify the HTML file (using the WEBREPORT file handle) in all of the print statements.

The  q[...]  used in the second print statement is just an optional way of quoting a string when that string itself contains quote marks. The output of these three print statements would appear as follows in the HTML page source file:

<PRE><!--#include file="rt-data.txt"></PRE>

and the URL for the created page would be (taking the file name from the third statement in the above sample code):

http://www.yourdomain.com/rtreport.shtml

(As noted in the previous section, the '.shtml' extension may be required by some servers for pages containing an SSI directive tag.)

However, keep in mind that the script has to be run from another page in order to create the real-time report HTML file. You could run it from some sort of menu page where viewing the report is a menu option. The tag you would put in the HTML for this menu page would be:

<!--#exec cgi="genrtr.pl"-->

This menu page could contain regular text links to a variety of reports. Each report would have to have its' own

  • exec tag in the menu page HTML
  • its' own script
  • it's own associated text file (real-time data) to be specified in the SSI include tag (coded in the script's print statement)


Tip:  There's no reason you have to use Perl at all in order to take advantage of the SSI include directive. Simply put the tag in any Web page to "suck in" some external data or text whenever the page is viewed. (Note that the text file could also contain HTML so you could, in effect, create one page from several different files.) In terms of this example, if you only had one report you could bypass the Perl script and menu page idea and just create an HTML report page with an SSI include directive and give the URL of the page to those who need to view it. (Each Web-server software package tends to have it's own set of SSI directives. The directives used here are for the widely used Apache Web-server software that runs on most Linux servers.)

Taking the above tip and bringing Perl back into the picture, you could use a script to test for things like time of day, day of week, IP address, or any other host of variables and branch to different print statements containing different SSI include directives and vary the content of the resulting Web page accordingly. You could also use additional print statements in your Perl script to add HTML code for headers, footers, company logo, links, etc. to a Web report.

You could also try renaming a script file so it has a '.cgi' extension and linking it to a graphics button. Using the above report script, the HTML tag would be something like:

<a href="/cgi-bin/genrtr.cgi"><img src="viewbttn.gif"></a>

If you're
familiar with forms, you can also call a .cgi script file from within a form with a tag like:

<form method="post" action="/cgi-bin/genrtr.cgi">

However, these above two methods will only work if the script doesn't require SSI support. Scripts that require SSI support need to be called with an SSI directive tag.

This example contains Perl, HTML, and SSI material so it may be a bit overwhelming if you've never worked with this stuff before but I wanted to use examples that could be useful to you at some point in the future should you decide to pursue Perl programming.
As you can see, Perl has many neat features too abundant to cover here. Suffice it to say that you can be writing Perl scripts within hours, not days, of reading up on it, and as your skills grow you'll be amazed at what you can do with it.

Good Books

Of all the books I've bought on Perl (about 12 of them) the following four are the most valuable and useful. They are excellent as either tutorials or in their completeness in their coverage of the subject. Clicking on a book's cover will take you to Amazon's "detail" page where you can read an overview of the book and comments posted by those who have purchased it.

Note: If you think you may buy any of these books, either now or in the future, please do so by using the book-cover links below instead of going to Amazon.com directly. By using the links here I'll get a small percentage of the sale which will help pay for the bandwidth the graphics on this page need.  Many thanks !
The comments next to the book covers are my own and they are my honest opinions, not a sales pitch.


Perl for Dummies  

  Perl For Dummies

The best book out there for beginners, including those who don't know a lot about programming. It comes with a CD that includes sample code and a copy of Perl-Win32 that you can use on your Windows-based system to test your scripts. The book covers using the Perl-Win32 software also. It doesn't get into the real fancy Perl functions but that's not its' goal. It's an "easy read" that will have you coding in no time.
Amazon customer review rating:

Perl 5  

  Mastering Perl 5 (Mastering)

If you're an experienced programmer this may be a good starting point for you. Very comprehensive in it's coverage of Perl, addressing functions that the "Dummies" book doesn't get to. The information is presented in a very easy-to-understand manner and doesn't assume you have a Unix background. (A lot of the more advanced books do.)
Amazon customer review rating:

Perl Programming  

  Effective Perl Programming: Writing...

I wish every programming language had a book like this. It is a unique work that will make a Perl programmer a good Perl programmer. It's a compilation of "items" that one usually only finds out with many years of experience. It's not a ground-floor tutorial like the "Dummies" book, but if you're going to learn Perl, you might as well learn to do it right. This should definitely be the second Perl book you read.
Amazon customer review rating:

Perl  

  Perl Developer's Dictionary

The undisputed "bible" of Perl references. O'Reilly & Associates have long been the standard in the Unix world with their "...in a nutshell" series. (So much so that Amazon has a separate "O'Reilly Bookstore" on their site.) Commonly referred to as "The camel book", this is a great desk reference to have at your side when coding. While I wouldn't recommend this book to someone looking to learn Perl, I can't imagine a serious Perl programmer being without it.
Amazon customer review rating:
Amazon Books and More   If you're going to Amazon to shop for something other than the above titles, please use this link to go there.

 

Fact: A recent study conducted by Sales and Marketing Executives International concluded that 81% of major sales are closed after the fifth contact.

Fact: 80% of people who inquire about a product or service will buy it within one year of their initial inquiry. However, more than 90% of the time, they don't buy from the same company that they made their initial contact with.

EZ-Response Follow Up Sequential Email Autoresponder

Now you can send unlimited follow up emails with file attachments automatically from your website. Make as many sequential letters as you need and send them at the interval you specify. Unlimited autoresponders, Unlimited follow ups, Unlimited users. One-click "remove-me" link. Easy to set-up and configure in 10 minutes. EZ -Response works without CRON jobs (which are not allowed on many servers). It's simple, efficient, and Automatic!

 

Try our Auto-Responder Demo now

 In Association with Amazon.com

Free Low Carbohydrate Menu's and Recipes

This is a 2000 year old Miraculous Diet Bread recipe

click here To Download Now

Old World Diet Bread Recipe

 

Site Build It!



I sincerely hope you found this page to be helpful and worthwhile.